Palletstor Drive-In Racking

Drive-in racking in action.

Palletstor drive-in racking provides a highly space-efficient solution to the storage and throughput of palletised goods.

By dispensing with access aisles drive-in racking provides a high-density of storage in a given area to increase capacity by some 60-80% over conventional 'aisle' racking.

Pallets are stored on guide rails in the depth of the racking and forklift trucks enter these 'storage lanes' to deposit or retrieve loads.

Access can be from one end (the true 'drive-in' configuration) or from both ends ('drive-through', allowing improved stock rotation).

Racking heights up to 11 metres allow the building height and floor area to be used to provide maximum cubic storage space.

Drive-in racking - the ideal solution for optimum space utilisation without requiring specialist handling equipment.

Palletstor Drive-In Pallet Racking						Palletstor Adjustable Beam Pallet Racking
operating features - star rating						operating features comparison - star rating
Utilisation of floor area						Utilisation of floor area
Utilisation of building height						Utilisation of building height
Usable cubic storage space						Usable cubic storage space
Speed of access & throughput						Speed of access & throughput
Access to individual pallets						Access to individual pallets
Stock rotation						Stock rotation
Specialised handling equipment	None required					Specialised handling equipment	None required
Ease & speed of installation						Ease & speed of installation
Ease of relocation						Ease of relocation
Adjustment of pallet positions						Adjustment of pallet positions

Finishes

* painted Graphite Grey uprights, upright bracing

* painted High Visibility Yellow beams, protectors

* Pre-Galvanised rear & overhead bracing, rails

† painted Light Grey uprights, upright bracing

‡ painted Blue RAL 5001 uprights, upright bracing

‡ painted Orange RAL 2004 uprights, upright bracing

‡ Pre-Galvanised uprights, upright bracing

Key:

* - standard

† - alternative

† - alternative (delivery & cost conditions may apply)

Components
1-Portal Beams	2-Pallet Guide Rails	3-Rail Spacer Brackets	4-Rail Protector Noses
Space the frames into lanes and, with overhead bracing, provide stability.	Provide the support for palletised loads within the drive-in lanes.	Used to space the guide rails from the uprights for additional load clearance.	Fitted to the guide rail entry points to protect against accidental impact.
5-Lead-In/Protectors	6-Guide Channels	7-Foot Plates	8-Frames
Protect the uprights against accidental impact and serve as lane guides.	Provide guidance for the movement of forklift trucks and pallets in the lanes.	Provide load-bearing stability and floor anchor points for the structure.	Varying combinations of uprights and bracing to meet the load criteria.